Why is the raincover needed when fabric of the bag is waterproof already?
The fabric of our motorcycle bags itself is waterproof because we have plastic sheet laminated on the back side of the fabric. During the bag assembly, it needs to have many stitching on the fabric to conceal the fabric into a bag. The reason to enclose the rain cover is to prevent the water going into bag through the needle hole on the fabric. For the short time exposed in the rain, it should not have problem at all without rain cover. But for long ride in the rain, it’s better to have rain cover on the bag to ensure the water is not coming through the needle hole. The rain cover has the plastic film taping on top of the stitching hole, so there is no possibility for water penetration.
This is a round shape motorcycle saddle bag which uses the heavy-duty 600D ripstop fabric and durable accessories. It has big volume. After doing the expansion of the bag, it can store 3/4 size helmet in. The saddle bag can be installed easily to your motorcycle with our secure universal mounting system. It has expandable compartment for the extra storage space. The designed main handle and top zippers of the luggage are just easy to carry. The waterproof rain covers are equipped to provide additional safety feature. This is a standard L size saddle bag. This is also good for scooter to install.
This is a specially design for sports motorcycle because it has a sharp angle to create the similar angle as the sports motorcycle. Its volume is not very big because of the shape, but it is enough for the glove and other accessories. Most importantly，it perfectly meets the upward angle of the rear part of the motorcycle. The saddle bag can be installed easily to your motorcycle with our secure universal mounting system. It has expandable compartment for the extra storage space. There are two pieces of large side D ring hidden inside of the back zipper pocket. The D rings can be used as an extra attachment for connection saddle bag to rear bag for your additional storage needs or just another way to attach the saddle bag to the motorcycle or metal rack.
This rear bag is designed to attach on the rear of motorcycle, and perfect for long distance ride. This rear bag is made from enhanced 600D Ripstop with PVC backing and PE board reinforcement inside. This rear bag has a huge main compartment with a big U shape zipper opening. It has PE board installed inside of the bag to hold up the bag in shape with or without a lot of stuff inside. Also this reinforcement creates better stability of the rear bag when the motorcycle is in high speed. It has 2 bottom pockets which can be dropped down when they are needed. Not only they can increase the storage, but also it generates another 2 points to hold on the motorcycle.
This extra large Motorcycle Saddle bags not only use the heavy-duty 600D ripstop fabric and durable accessories, but also smartly integrate the wheel and trolley bag into the bag. Both sides of saddle bag can be combined together as one piece. Trolley and wheel can make the trip as easy as travel luggage. Make the user experience for the saddle bags more convenient ever. It has 26.6 Liter volume each, and it can becomes 37.8 liter volume after expansion. Reflective strip is applied. The designed main handle and top zippers of the luggage are just easy to carry. It is also possible to be combined use with a Tail bag for your additional storage needs. The waterproof rain covers are equipped to provide additional safety feature.
The large round shape motorcycle saddle bags use the heavy-duty Nylon 1680D fabric with foam lamination and durable accessories. It has expandable compartment for the extra storage space. It can be installed easily to your motorcycle using our secure universal mounting system. Two main wide straps at the center of the bags are able to adjust by the Velcro based on the width of the seat. Another two straps on the back side of the bag can attach on the metal frame or passenger handle of the motorcycle to stabilize the bags when the motorcycle turns. The zipper pocket at the back side of the bag can store all the straps when it is not used and off the motorcycle. Reflective strips on 3 sides of the bag are applied.
This motorcycle rear bag has roll-top with cover flap design. The two side pockets are detachable. The size of the bag is about to carry two pieces of 3/4 size of helmets with full capacity. This rear bag is made from Nylon 1680D ballistic with PVC backing. It has a center stable strap and two release buckle strap under seat for stability. Moreover, there are two adjustable straps to attach the metal frame or passenger handle through the Tri-lock buckle on the side pocket. Four extra D rings at the bottom provide the ability to connect to Saddle bag or being a different point to fasten the strap and stabilize the bag on the motorcycle. Reflective strip is applied.